Correct Ways to Clean Up a Broken CFL

Correct Ways to Clean Up a Broken CFL

Have you ever had to clean up a broken CFL?

If you learned about the mercury content in compact fluorescents and just how much of a threat it can be to your health. However, you were probably left with this question: If a CFL in your home breaks, what do you do? You don’t need to call a hazmat team, but you will need to follow these 4 tips for your safety:

1. Don’t Step On the Glass

First, don’t panic. Your exposure to mercury from a broken CFL is less than that in a tuna sandwich. Though the danger of mercury exposure is minimal, use common sense: Get everyone out of the room and make sure they don’t step on the glass.

2. Close Off the Room and Open the Windows

Next, close off the room and open the windows to let any mercury vapors ventilate. It’s also a good idea to turn off your HVAC system to avoid circulating the vapors throughout your home. The room should be safe to re-enter after about 10 minutes*.

3. Collect the Debris

Upon returning to the room, collect the debris, including broken glass, powder, and plastic from the broken lamp. Do this by scooping up the broken pieces with a stiff piece of paper. Use the sticky side of a piece of duct tape to pick up any smaller pieces remaining on the floor or stuck in carpet fibers. However, do not use a vacuum cleaner, which could excite the mercury on the floor and release it into the air.

4. Recycle or Dispose

Finally, place all materials in a sealable container such as a jar or pack it within two zipper bags. Dispose of the CFL and its container according to laws in your area. Though most areas allow CFLs to be disposed of in the garbage, the best way to dispose of a CFL, broken or intact, is by recycling. The process is simple, inexpensive, and in some areas, it’s even free.

*As recommended by the US EPA. Smaller or poorly ventilated rooms should be left unoccupied for a longer period of time.

Website: www.liteharborfactory.com

Contact info@liteharbor.com