LITEHARBOR HARBOR OF LIGHT! Leader of recessed downlight in China!

knowledge news

knowledge news

YOUR CURRENT POSITION: Home > RESOURCE > knowledge news

Tips for Picking Recessed Lighting Housings

Tips for Picking Recessed Lighting Housings

 

Recessed Lighting lead as stylish and contemporary out-of-sight lighting.

Recessed Lights sit flush with the ceiling and usually appear as little more than a round hole or square to permit light; the perfect design for keeping a smooth and neat ceiling.Home lighting itself focuses on the smaller form factor of can lights (typically two to six inches in diameter) while commercial offices use larger fluorescent troffers for uniform lighting.How to choose Recessed Lighting housings? Here are the important factors to consider the next time you’re looking at installing or improving recessed fixtures.

 

Before You Buy Recessed Housings

 

  • 1. Know where you plan to place the downlight. If the housing will be in contact with any insulation you will need an Insulation Contact (IC) rated housing.These housings are designed to protect the insulation in your ceiling from the downlight and prevent house fires.  Don’t neglect to measure the aperture diameter and housing height to make sure you have enough space in your ceiling and have the correct size hole for your light.

 

  • 2. Check what your line voltage is (for most US homes it’s 120 volts) to make sure both your housing and light source operate at the proper voltage level.

 

  • 3. Consider the socket type for your intended lamp. Some restrictions apply based on location.  For example, the State of California requires high-efficiency lighting (Title CA 24) in residential remodels and construction.This typically means CFL lamps using a GU24 base. Standard Edison medium base bulbs are more common and allow for a more flexible installation.

 

In short, be sure to plan ahead for location, insulation and housing size, line voltage, and socket type before purchasing your new recessed light.

 

remodel recessed lighting hosing

Remodel NON-IC Recessed Lighting Housing Liteharbor Model:AD4-R

New Construction Recessed Lighitng Housing

New Construction IC Airtight Recessed Lighting Housing Liteharbor Model:A4-IA

 

Bulbs Different lamp shapes are also affected by your choice of housing. Typical housings range between two and four inches for cabinet and niche lighting and up to six inches for ceilings. The larger diameters allow for full retrofit modules and PAR or R flood lamps while smaller sizes are designed for halogen or LED MR-shape lamps. The MR sized lamps are great for accent or spot lighting while the larger flood lamps effectively cover a room in general lighting systems.

Be sure to follow up with Part 2: Recessed Lighting Trims. Let us know what you look for in Recessed Lighting or what you’re looking for next when it comes to low-profile lighting. And check out our step-by-step guide for installing recessed can lights yourself.

 

Feel free to share with us in a comment or to drop us a line on Facebook, Twitter, Google Plus,or LinkedIn!

More Recessed Lighting Housing >>> http://www.liteharborfactory.com/recessed-downlight/2.html

Website >>> www.liteharborfactory.com

Email >>> info@liteharbor.com

Products

Communicate with Supplier
Hot Line +86-757-81808675 Mob. +86-13620811065 Skype liteharborlighting Whatsapp +86-13620811065 E-MAIL Info@liteharbor.com
X
top move